Fluids and Pressure
How pipe networks share fluids, how pressure builds and how to keep pipes from bursting.
Fluid networks
Pipes and tanks that touch form one network with a single shared pool of one fluid. The fluids are:
water, lava, steam, crude oil, fuel, lubricant, coolant, and molten iron, copper and gold.
| Block | Holds | Steam rating |
|---|---|---|
| Copper Pipe | 1,000 mB | 8 bar (ages like copper) |
| Brass Pipe | 2,000 mB | 16 bar, never ages |
| Rift Pipe | 8,000 mB | 64 bar |
| Copper Tank | 16,000 mB | 10 bar (ages like copper) |
Right-click a tank with a bucket to pour in or fill up, or empty-handed to see what's inside. A Fluid Interface fills and empties buckets (including oil and fuel buckets) from a touching pipe, and can be fed by cargo.
Use the Pressure Gauge on a pipe to read its network, or wear Brass Goggles to see what any pipe you look at holds.
Pressure
A steam network's pressure runs from 0 bar (empty) to 16 bar (full).
- Above the rating of its weakest block, the network vents.
- Kept over that rating for 30 seconds, that block bursts into Pipe Scrap (smelt it back into copper).
To stay safe:
- A Relief Valve vents steam whenever the line rises above its setting (4 to 14 bar), so it never bursts.
- A Steam Whistle blows when a line nears bursting pressure.
- A Condenser turns spare steam back into water (100 mB to 90 mB).
Copper ageing
Copper pipes and tanks weather from Fresh to Oxidised every few minutes, losing 10% of their rating per stage.
- Honeycomb waxes them so they stop ageing.
- An axe or a Copper Rivet scrapes them back a stage. The Rivet Gun does it from a distance.
- Brass Pipes never age.